(1) CINCINANTI MILACRON 5VC-15 X 30 - 24 TOOL CHANGES (USA made)

(2) HAAS VF3,20 X 40 –20 TOOL CHANGES 4 AXIS
(1) HAAS VF2,15 X 30 –20 TOOL CHANGES 4 AXIS
(2) CNC ROTARY, FULL A AXIS ENCODER TABLES 8” WITH RISERS
(1) HAAS SL-20 TURNING CENTER 22" Swing 10 Station Turret 20 Hp 

MANUALLY OPERATED MACHINERY:
(1) JIG BORE: PRATTT & WHITNEY 18" X 32" X 32"  NO.2A, 20” .0001 readout.
(3) MILLING MACHINES: BRIDGEPORT  With .0001 readout
(1) LATHE: MORISEIKI 19/26 X 48 GAPBED, 5-C Colet, 10" 12" 3 Jaw & 12" 4 Jaw   
(1) LATHE, ENGINE TRACER: H.E.S. rear hydraulic tracer, Gap-bed 31 X 60
(3) PEDESTAL GRINDERS: 1W/DIAMOND WHEEL
(1) PEDESTAL WIRE WHEEL GRINDER
(1) SURFACE GRINDER: DOALL Automatic feed, w/power coolant .0001 graduations
(1) SURFACE GRINDER: HARVEL High precision .00005 
(1) CUT-OFF SAW: JET 72" Band, horizontal  
(1) CUT-OFF SAW: KING 18" abrasive disk. chop saw
(1) VERTICLE BAND SAW: GROB 115" 36" Throat W/Welder

WELDING EQUIPMENT:
(1) OXYCETALINE SET (gas welding)
(1) MIG WELDER: MILLERMATIC wire feed welder

INSPECTION EQUIPMENT:
DEA 3-AXIS COORDINATE MEASURING MACHINE 18" X 26" X 40"  Full MBD System
GRANITE SURFACE PLATE 48” X 96”
GRANITE SURFACE PLATE 36” X 36”
BROWN & SHARPE HITE SET 20” - .0001
CADILLAC GAGE 6’ - .0001
PROFILOMETER
SETS OF O.D. MICROMETERS UP TO 20”
SET OF I.D. MICROMETERS UP TO 40”
SET OF DEPTH MICROMETERS TO 6”
SUPER MICROMETERS 0 TO 1”-1” TO 2” TO 3”-3”TO 4”
THREAD MICROMETERS 0 TO 1”- TO 2”
BLADE MICROMETERS 0 TO 1”-1” TO 2”- 4” TO 5”
GROOVE MICROMETERS 0 TO 1”
SETS OF HOKE GAGE BLOCKS
SETS OF GAGE BLOCK ACCESSORIES
DIAL BORE GAGES 1/4" TO 1/2" (.0001)
DIAL BORE GAGES 1/2" TO 3/4" (.0001)
DIAL BORE GAGES TO 1-1/2"(.0001)
DIAL BORE GAGES TO 2-1/2" (.0001)
DIAL BORE GAGES UP TO 6" (.0001)
DIAL BORE GAGES UP TO 10" (.0001)
DIAL BORE GAGES UP TO 12" (.0001)
5” SINE BAR, 10” SINE  BAR,10” SINE PLATE
VERNIER  BEVEL PROTRACTOR
MASTER SQUARE
.001 INDICATORS, .0005 INDICATORS, .0001 INDICATORS, .00005 INDICATORS
DELTRONIC PIN SETS: 1/8 – 3/16 – ¼ - 5/16 – 3/8 – ½
LOT OF ASSORTED DELTRONICS FROM .0900 TO 1.0000
SET OF PIN GAGES .011 TO .060
SETS OF PIN GAGES .061 TO .250
SETS OF PIN GAGES .061 TO .500
SET OF PIN GAGES .501 TO .625
SET OF PIN GAGES .626 TO .750
MASTER ANGLE PLATE 8 X 9 X 16
MASTER ANGLE PLATE 12 X 12 X 18
MASTER ANGLE PLATE GRANITE 4 X 6 X 6
36” 50X BORSCOPE
HEIGHT GAGES 24”
(3) MITUTOYO HITE SET 24”
SET OF MICROMETERS STANDARDS TO 11”
VERNIER CALIPER 0" TO 60”
INDI-CAL I.D. GROOVE INDICATORS
DIAL SNAP GAGE 1” TO 2”
FEDERAL AIR GAGE .00005
TITAN BORE SCOPE – 28”
6’ STRAIGHT EDGE
ROCKFORD HARDNESS TESTER
STARRETT PRECISION LEVEL .0005/1 FOOT
J & L COMPARATOR 14”

ROLLING STOCK:
(1) 2007 FORD 8” BED PICK UP TRUCK
(1) HYSTER FORK LIFT – 6,500 lb. Capacity